With the arrival of summer, the temperature and humidity rise gradually, and the probability of glass mildew increases greatly.

Glass mildewing occurs during storage or transportation after packaging. In view of this situation, the following measures can be taken:

(1) add glass isolation powder during packaging

(2) the glass storage place shall be in a well ventilated warehouse

(3) glass boxes are not allowed to be placed directly on the wet ground in the warehouse

(4) it is not allowed to store glass outdoors or under direct sunlight

If it is moldy now, glass mold remover should be used to the surface defects of glass formed by moldy glass. The detailed dosage of glass mold remover depends on the moldy situation. The mold remover needs to wear rubber gloves, masks and protective glasses, dip the product properly with sponge or cotton cloth and wipe it at the moldy place. Keep the liquid at the moldy place for 3 seconds to 3 minutes, and then clean it again with clean water. If it is severe moldy, the reaction time should be extended appropriately. The effect of mold removal depends on the time of glass mold, the product type of glass, the type of glass mold and the ratio of mold removal agent.

In the end, glass mold remover is not, and not all glass molds can be. In order to reduce the loss of reputation of glass production enterprises and deep-processing enterprises due to glass scrapping, a good way is to take measures in advance.

Article source: fireproof glass http://m.cnagiletools.cn/